Page 94 - 无损检测2024年第十一期
P. 94

陈 军,等:

              装甲车诱导轮涡流检测阵列探头设计仿真与试验分析

              结果表明,阵列探头信号幅值比点式探头幅值平均                                 roughness[J]. Environmental Fluid Mechanics,2018,18
              提高约30%,检测效率提高约85%。                                    (1):97-116.
                                                                  [10]  ABU-NABAH  B  A.Reduction  of  lift-off  effect  in
              参考文献:                                                  high-frequency  apparent  eddy  current  conductivity
                                                                     spectroscopy[J]. Measurement Science and Technology,
                [1]  毛明,庞宝文. 坦克装甲车辆技术发展新动向和发展重
                                                                     2017,28(5):055107.
                   点[J]. 车辆与动力技术,2012(3):51-55.
                                                                  [11]  ZHANG  H  Y,XIE  F  Q,CAO  M  Y,et  al.A  steel
                [2]  朱兴高,顾亮.  某型履带车辆诱导轮结构强度分
                   析[J]. 太原理工大学学报,2015,46(3):274-277.                ball  surface  quality  inspection  method  based  on  a
                                                                     circumferential  eddy  current  array  sensor[J]. Sensors,
                [3]  ZHANG P,ZHANG X C,CAO X,et al.Analysis on
                                                                     2017,17(7):1536.
                   the  tool  wear  behavior  of  7050-T7451  aluminum  alloy
                   under  ultrasonic  elliptical  vibration  cutting[J]. Wear,    [12]  JANOVEC  M,SMETANA  M,BUGAJ  M.Eddy
                   2021,466/467:203538.                              current  array  inspection  of  zlin  142  fuselage  riveted
                                                                     joints[J]. Transportation  Research  Procedia,2019,40:
                [4]  CHEN H,YANG Y L,CAO S L,et al.Fatigue life
                                                                     279-286.
                   prediction  of  aluminum  alloy  6061  based  on  defects
                   analysis[J]. International  Journal  of  Fatigue,2021,147:    [13]  金翠娥,周建平,范晨洁. 铝合金熔焊缝的阵列涡流检
                   106189.                                           测工艺[J]. 无损检测,2017,39(3):47-50.
                [5]  CHEN  Y  T,FENG  B,KANG  Y  H,et  al.A  novel     [14]  SHAO  Y  C,MENG  T,YU  K  H,et  al.Automatic
                   thermography-based  dry  magnetic  particle  testing   detection  and  imaging  of  rivet  hole  defects  for  aircraft
                   method[J]. IEEE  Transactions  on  Instrumentation   structures with optimized sensor array using eddy current
                   Measurement,2022,71:3165742.                      method  and  image  analysis[J]. IEEE  Sensors  Journal,
                [6]  程怒涛,杨涛,罗炜,等. 蒸汽发生器管板与换热管                        2023,23(5):4597-4606.
                   密封焊缝渗透检测非相关显示的甄别[J]. 无损检测,                     [15]  SHENG X,LI Y,LIAN M,et al.Influence of coupling
                   2023,45(1):72-75.                                 interference  on  arrayed  eddy  current  displacement
                [7]  周庆祥,李刚卿,侯凯,等. 铝合金部件裂纹缺陷的多                       measurement[J]. Materials  Evaluation,2016,74(12):
                   通道涡流检测仿真与试验研究[J]. 电子测试,2022,36                    1675-1683.
                  (17):34-38,87.                                  [16]  MOHAMAD  A  J,ALI  K,RIFAI  D.Effect  of
                [8]  VARGHESE  J,DURBIN  P  A.Representing  surface   single  and  multi-direction  coil  for  differential  probe
                   roughness  in  eddy  resolving  simulation[J]. Journal  of   on  depth  crack  defect  measurement  with  different
                   Fluid Mechanics,2020,897:A10.                     excitation  frequency  selection  in  eddy  current
                [9]  JIANG  Y,LIU  X.Experimental  and  numerical    inspection[J]. Journal  of  Physics:Conference  Series,
                   investigation  of  density  current  over  macro-  2022,2319(1):012008.































                60
                     2024 年 第 46 卷 第 11 期
                     无损检测
   89   90   91   92   93   94   95   96   97   98   99