Page 127 - 无损检测2021年第三期
P. 127

实践经验



            DOI : 10.11973 / ws j c202103018


             DR      与传统胶片技术在核电检测中的能效对比



                                           纪   晖, 范   义, 孙林辉, 陈   衡, 华雄飞

                                          ( 中广核检测技术有限公司, 苏州 215000 )
                     摘  要:从人员投入、 占用时间、 现场实施、 成本投入等方面对数字射线成像( DR ) 技术和胶片

                 射线检测技术在核电厂大修检测的实际应用情况进行了能效对比, 为数字射线成像技术在核电领
                 域的进一步应用提供支撑。通过数据分析可知, DR 检测技术的应用还有较大的提升空间, 但是在
                 很长的一段时间内, DR 检测技术和胶片检测技术仍将并行存在, 相辅相成。

                     关键词: DR 检测技术; 胶片检测技术; 核电; 能效对比

                    中图分类号: TG115.28    文献标志码: B    文章编号: 1000-6656 ( 2021 ) 03-0085-03


            Thecom p arisonoftheener gy efficienc y forDRandtraditionalfilmtechnolo gy innuclear p ower p lant

                                      JIHui , FANYi , SUNLinhui , CHENHen g HUAXion g fei
                                                                       ,

                                   ( C g n p cIns p ectionTechnolo gyCo. , Ltd. , Suzhou215000 , China )

                    Abstract : Thisp a p ercom p arestheener gyefficienc yofdi g italra yima g in g ( DR ) technolo gyandfilm ra y

                detectiontechnolo gy in nuclear p ower p lants from the as p ects of p ersonnelin p ut , occu p ation time , field

                im p lementationandcostin p ut , soastop rovidesu pp ortforthefurthera pp licationofdi g italra y ima g in g technolo gy

                innuclearp ower.Throu g hdataanal y sis , itisconcludedthatthereisstillalar g eroomforthep romotionand

                a pp licationofDRdetectiontechnolo gy , butinalon gp eriodoftime , DRdetectiontechnolo gyandfilm detection

                technolo gywillstillexistinp arallelandcom p lementeachother.

                    Ke ywords : DRtechnolo gy ; filmdetectiontechnolo gy ; nuclear p ower ; ener gyefficienc y com p arison
               随着国内核电建设的推广、 发展和核电结构老                           与物体原子相互作用, 部分光子的能量和方向发生
            化检测的迫切需求, 射线检测成为核电结构检测的                            改变, 产生二次光子, 二次光子与方向不发生改变的
            重要手段。目前采用的胶片照相法的不足在于其具                             一次光子一同进入平板探测器, 最终变成数字信号

            有检测周期长, 底片数量多且储存困难, 查阅不便,                          在计算机中完成图像的显示              [ 1 ] 。 Leadin gSi g ht型
            胶片成本高, 曝光时间长, 底片难以共享等缺点。近                          数字射线成像系统及平板探测器性能参数分别如图
            年来, 数字成像检测技术快速发展, 受到业界的广泛                         1 和表 1 所示。
            关注。笔者对数字射线成像( DR ) 技术在核电厂的
            运用情况进行总结, 为数字射线成像技术在核电运
            用的进一步推广提供支撑。
            1  系统概述


               试验采用的 Leadin gSi g ht型数字射线成像系
            统由放射源、 平板探测器、 电源、 计算机及软件等组

            成。其原理是射线源产生的射线穿过被检测物体,                                    图 1 Leadin gSi g ht型数字射线成像系统

                                                              2  能效对比
                收稿日期: 2020-06-04
                作者简介: 纪   晖( 1988- ), 男, 工程师, 从事射线无损检测方面
            的研究工作                                             2.1  人员投入对比
                                                                  DR 检测技术可在现场透照后直接成像, 省去了
                通信作者: 纪   晖, hui459306@126.com
                                                                                                         5
                                                                                                        8
                                                                                       2021 年 第 43 卷 第 3 期


                                                                                               无损检测
   122   123   124   125   126   127   128   129   130   131   132