Page 106 - 无损检测2023年第四期
P. 106

岳登魁, 等:

   “中温环境”环氧树脂固化过程的 Lamb波实时监测

                                                     氧树脂的固化过程。

                                                                         模式 Lamb 波声衰减系数的
                                                          ( 2 )环氧树脂 S 0
                                                     变化能够完整反应环氧树脂的固化过程, 准确判断
                                                     出环氧树脂的固化状态; 环氧树脂越厚, 固化速度
                                                     越快。
                                                     参考文献:



                                                      [ 1 ]  TEH PL , MARIATTI M , AKIL H M , etal.The

     图11  环氧树脂固化过程中不同时刻的超声回波信号                            p ro p erties of e p ox y resin coated silica fillers


                                                          com p osites [ J ] .MaterialsLetters , 2007 , 61 ( 11 ): 2156-
                                                          2158.

                                                      [ 2 ]  SILVIAG , PROLONGO.Com p arativestud yonthe

                                                          adhesivep ro p ertiesofdifferente p ox yresins [ J ] .

                                                          InternationalJournalof Adhesion and Adhesives ,
                                                          2006 , 26 ( 3 ): 125-132.

                                                      [ 3 ]  FAN-LONG , JIN.S y nthesisanda pp licationofe p ox y

                                                          resins : a review [ J ] .Journal of Industrial and

                                                          En g ineerin gChemistr y , 2015 , 29 : 1-11.
                                                      [ 4 ]  张宝华, 叶俊丹, 陈斌, 等. 固化温度对环氧树脂固化
                                                           物性能的影响[ J ] . 塑料工业, 2009 , 37 ( 9 ): 64-66 , 79.
                                                      [ 5 ]  黄蕾霖, 邵宇鹰, 庞拂飞, 等. 基于光纤 F-P 腔的耐高
                                                           温胶固化特性研究[ J ] . 光通信技术, 2019 , 43 ( 8 ): 38-
                                                          41.

                                                      [ 6 ]  KARAMANOLEVSKI P , BUŽAROVSKA       A ,

                                                          BOGOEVA-GACEVAG.Theeffectofcurin g a g ents

                                                          onbasic p ro p ertiesofsilicone-e p ox y h y bridresin [ J ] .
                                                          Silicon , 2018 , 10 ( 6 ): 2915-2925.
     图12  不同厚度环氧树脂超声衰减系数随固化时间的                        [ 7 ]  杨亚军, 王召巴. 丁羟衬层固化过程实时监测方法

                      变化曲线                                 [ J ] . 固体火箭技术, 2013 , 36 ( 6 ): 842-846.


   升趋势减缓并在1200min出现峰值, 即交联反应不                         [ 8 ]  MITRA M , GOPALAKRISHNAN S.Guided wave





                                                          basedstructuralhealth monitorin g : areview [ J ] .
   断加剧, 刚度不断增加, 为环氧树脂凝胶阶段; 在监测
                                                          SmartMaterialsandStructures , 2016 , 25 ( 5 ): 053001.

                       模式声衰减逐渐下降, 此时环
   时间1200min后, S 0
                                                      [ 9 ]  LEVITAG , LIVIA , ROLLA P A , etal.Dielectric
   氧树脂内部大分子的交联反应占主导地位, 为树脂刚
                                                           monitorin gofe p ox ycure [ J ] .JournalofPol y mer

   性玻璃态阶段; 环氧树脂大约在1900min时完成固                             SciencePartB : Pol y merPh y sics , 1996 , 34 ( 16 ): 2731-





   化; 当环氧树脂厚度增加到3mm 后, 固化衰减峰值                             2737.

   时间 出 现 在 800 min 左 右, 固 化 时 间 大 约 为               [ 10 ]  MITRA M , GOPALAKRISHNAN S.Guided wave


                                                          basedstructuralhealth monitorin g : areview [ J ] .
                模式声衰减与之前相比更为剧烈。
   1500min , S 0

                                                          SmartMaterialsandStructures , 2016 , 25 ( 5 ): 053001.
  4 结论                                               [ 11 ]  邱雷. 飞行器压电 SHM 与管理方法研究[ D ] . 南京:




                                                           南京航空航天大学, 2011.
     提出了一种在85℃环境下监测环氧树脂固化

                                                     [ 12 ]  ZHOU K , XU X S , ZHAO Z , etal.Excitationof
                                      ,   模 式 的
                                                          p laneLamb waveinp late-likestructuresunder
   过程 的 Lamb 波 监 测 系 统, 使 用 A 0 S 0




   Lamb波监测了衬层的固化过程, 并得出以下结论。                              a pp liedsurfaceloadin g [ J ] .Smart Materials and
                                           模式声

       ( 1 )在环氧树脂固化过程的监测中, A 0                            Structures , 2018 , 27 ( 2 ): 025011.
                        模式声衰减曲线一致性更                  [ 13 ]  周知进, 文泽军, 卜英勇. 小波降噪在超声回波信号处
   衰减曲线一致性差, S 0
                模式更适用于在85℃环境下监测环                           理中的应用[ J ] . 仪器仪表学报, 2009 , 30 ( 2 ): 237-241.

   好、 更稳定; S 0
     8
    6
          2023年 第45卷 第4期
          无损检测
   101   102   103   104   105   106   107   108   109   110   111