• 中国科技论文统计源期刊
  • 中文核心期刊
  • 中国科技核心期刊
  • 中国机械工程学会无损检测分会会刊
高级检索

基于振动特性的点阵桁架夹心板损伤检测数值模拟

田淑侠, 陈振茂

田淑侠, 陈振茂. 基于振动特性的点阵桁架夹心板损伤检测数值模拟[J]. 无损检测, 2009, 31(12): 928-930.
引用本文: 田淑侠, 陈振茂. 基于振动特性的点阵桁架夹心板损伤检测数值模拟[J]. 无损检测, 2009, 31(12): 928-930.
TIAN Shu-Xia, CHEN Zhen-Mao. Numerical Simulation on Damage Identification Using Vibration Signals for Lattice Truss Sandwich Plate[J]. Nondestructive Testing, 2009, 31(12): 928-930.
Citation: TIAN Shu-Xia, CHEN Zhen-Mao. Numerical Simulation on Damage Identification Using Vibration Signals for Lattice Truss Sandwich Plate[J]. Nondestructive Testing, 2009, 31(12): 928-930.

基于振动特性的点阵桁架夹心板损伤检测数值模拟

基金项目: 

国家973资助项目(2006CB601206, 2007CB707702)

自然科学基金资助项目(50677049)

教育部新世纪人才资助项目

详细信息
    作者简介:

    田淑侠(1984-), 博士研究生, 研究方向为结构动力损伤检测。

  • 中图分类号: TG115.28

Numerical Simulation on Damage Identification Using Vibration Signals for Lattice Truss Sandwich Plate

  • 摘要: 研究了基于振动特性的点阵桁架夹心板损伤识别。首先, 通过与已有的结果对比, 验证了点阵桁架夹心板有限元模型的正确性。然后, 基于此模型对包含不同位置不同程度脱焊损伤的点阵桁架夹心板的固有频率和模态振型进行了计算和比较, 分析了脱焊损伤与结构固有频率、模态振型之间的关系。研究结果为进一步进行点阵桁架夹心板脱焊损伤检测奠定了基础。
    Abstract: A numerical study for vibration based lattice truss structural damage identification was presented. Firstly, the validity of the numerical model was verified by comparing the calculated results with those of other researchers. Then, based on this model, vibration behaviors were simulated for delamination damages of different locations and different damage degree, and the relationship between delamination damage and natural frequencies and modal shapes was analyzed. The research results laid a foundation for the further study of the delamination damage inspection of lattice truss sandwich plate.
  • [1] 王展光, 单建, 何德坪.金字塔栅格夹心夹层板动力响应分析[J].力学季刊, 2006, 27(4): 707-713.
    [2] Gregory W Kooistra, Wadley Haydn N G. Lattice truss structures from expanded metal sheet[J]. Materials and Design, 2007, 28(2): 507-514.
    [3] Liu J S, Lu T J, Torquato S. Simulated properties of Kagome and tetragonal truss core panels[J]. International Journal of Solids and Structures, 2004, (41): 619-635.
    [4] Wicks N, Hutchinson J W. Mechanical behavior of a three-dimensional truss material[J]. International Journal of Solids and Structures, 2001, (41): 5105-5124.
    [5] Valdevit L, Hutchinson J W, Evans A G. Structurally optimized sandwich panels with prismatic cores[J]. International Journal of Solids and Structures, 2004, (41): 619-635.
    [6] Sugimura Y. Mechanical response of single-layer tetrahedral trusses under shear loading[J]. Mechanics of Materials, 2004, (36): 715-721.
    [7] 李斌潮, 张钱城, 卢天健.基于实验模态分析的点阵夹层结构动态性能预测[J].固体力学学报, 2008, 29(4): 373-278.
计量
  • 文章访问数:  2
  • HTML全文浏览量:  0
  • PDF下载量:  1
  • 被引次数: 0
出版历程
  • 收稿日期:  2009-07-31
  • 刊出日期:  2009-12-09

目录

    /

    返回文章
    返回