The Application of Industrial CT Technology in Reversing Engineering of Nozzle
-
摘要: 介绍了工业CT技术在逆向工程中的应用,通过对逆向工程方法的分析,提出了利用工业CT断层扫描技术对喷涂用喷管进行原始数据获取,然后经过边界提取与结构分析来精确测量喷管内部的尺寸变化,并制定出一系列的技术方案,从而保证喷涂喷管内部尺寸数据的安全性和可靠性。Abstract: Dedicated to the reverse engineering application, this paper discusses the general principle of ICT method and analyzes the method of boundary extraction and structural analysis of typical product (nozzle). Then the changes of inner dimensions were achieved to make research approach. At last, this experiment was carried out to make sure the safety and reliability of nozzle when using the inner dimension date.
-
Keywords:
- Industrial CT scanning /
- Reversing engineering /
- Inner dimensions
-
-
[1] SAKAKI K, SHIMIZU Y. Improvement in wire arc spray by supersonic cold gas jet[C]∥Thermal Spray 2001: New Surfaces for a New Millennium. OH USA: ASM International, Materials Park,2001:441-445. [2] WANG X, HEBERLEIN J, PFENDER E, et al. Effect of nozzle configuration,gas pressure,and gas type on coating properties in wire arc spray[J]. Journal of Thermal Spray Technology,1999,8(4):565-575. [3] LIAO H L, ZHU Y L, BOLOT R, et al. Size distribution of particles from individual wires and effects of nozzle geometry in twin wire arc spraying[J]. Surface and Coating Technology,2005,200:2123-2130. [4] 方新,费仁元.零件工业CT成面数据研究[J].现代制造工程,2003(8):69-70. [5] 刘庆民,王龙山,陈向伟,等.滚珠丝杠副内螺纹的图像测量[J].中国机械工程,2005,16(15):1328-1331.
计量
- 文章访问数: 0
- HTML全文浏览量: 0
- PDF下载量: 1