反应堆压力容器主螺栓超声波检测技术

详细信息

Ultrasonic Testing Technique for Closure Stud of Reactor Pressure Vessel

摘要: 反应堆压力容器主螺栓作为核设备的重要部件, RSEM标准要求役前及在役阶段对其进行超声波检查。该检测是个多系统配合的过程, 它必须依赖专用超声波检查系统、机械扫查器和控制系统的统一协作才能完成。介绍了反应堆压力容器主螺栓超声波检测的部位、探头的选用、仪器的选用以及扫查方式、标定及校核、采集系统和分析系统。
- 反应堆压力容器主螺栓 /
- 超声波检测 /
- 探头 /
- 采集与分析
Abstract: As an important component of nuclear devices, reactor pressure vessel closure studs need to be examined during pre-and in-service inspection according to RSEM. The inspection equipment is a complicated system including mechanical devices, controlling devices and UT inspection devices. This paper focuses on introducing the scope of the reactor pressure vessel closure studs by UT, selection of probes, scanning pattern, and the calibration & verification, used equipments, acquisition and analysis system.
- Reactor pressure vessel closure stud /
- Ultrasonic testing /
- Probe /
- Acquisition and analysis

[1]	法国标准RSE-M 核电厂核岛机械设备在役检查规则[S].
[2]	李明, 陈怀东, 肖学柱, 等.核电站反应堆压力容器超声检查技术及装备研究[C].电力系统第十一届无损检测学术会议论文集.青海西宁: 中国电机工程学会火力发电分会, 2009: 71-82.