• 中国科技论文统计源期刊
  • 中文核心期刊
  • 中国科技核心期刊
  • 中国机械工程学会无损检测分会会刊
高级检索

工业CT系统空间分辨力测试方法

郭智敏, 倪培君, 乔日东, 唐盛明, 李红伟, 王晓艳

郭智敏, 倪培君, 乔日东, 唐盛明, 李红伟, 王晓艳. 工业CT系统空间分辨力测试方法[J]. 无损检测, 2011, 33(11): 13-16.
引用本文: 郭智敏, 倪培君, 乔日东, 唐盛明, 李红伟, 王晓艳. 工业CT系统空间分辨力测试方法[J]. 无损检测, 2011, 33(11): 13-16.
GUO Zhi-Min, NI Pei-Jun, QIAO Ri-Dong, TANG Sheng-Ming, LI Hong-Wei, WANG Xiao-Yan. Study on Assessment Techniques for ICT Scanner Spatial Resolution Measurement[J]. Nondestructive Testing, 2011, 33(11): 13-16.
Citation: GUO Zhi-Min, NI Pei-Jun, QIAO Ri-Dong, TANG Sheng-Ming, LI Hong-Wei, WANG Xiao-Yan. Study on Assessment Techniques for ICT Scanner Spatial Resolution Measurement[J]. Nondestructive Testing, 2011, 33(11): 13-16.

工业CT系统空间分辨力测试方法

详细信息
    作者简介:

    郭智敏(1982-),硕士研究生,从事工业CT图像处理、性能测试技术研究。

  • 中图分类号: TG115.28

Study on Assessment Techniques for ICT Scanner Spatial Resolution Measurement

  • 摘要: 介绍了工业CT系统空间分辨力的测试方法,研究了扫描参数对CT系统空间分辨力的影响规律。采用直接、间接测试方法分别测试了三套工业CT系统的空间分辨力。结果表明,在相同试验条件下,直接测试方法的测试结果要明显高于间接测试方法。最后,对试验结果及测试方法之间的等效关系进行了探讨。
    Abstract: This paper represents the subjective method and objective method, which were dedicated to the assessment of spatial resolution in CT system, and analyses the influence rule of scan parameters on the spatial resolution of CT image. The comparative study of the two methods was carried out in 3 ICT systems under the same condition, and it was found that the test result of subject method was significantly higher than the result of object method, and then the test result and relationship between two methods was discussed.
  • [1] GJB 5312—2004工业射线层析成像(CT)检测[S].
    [2] ASTM E 1695—1995Standard Test Method for Measurement of CT System Performance[S].
    [3] GJB 5311—2004工业CT系统性能测试方法[S].
    [4] 张朝宗,郭志平,等.工业CT技术和原理[M].北京:科学出版社,2009:51-67.
计量
  • 文章访问数:  5
  • HTML全文浏览量:  0
  • PDF下载量:  2
  • 被引次数: 0
出版历程
  • 收稿日期:  2010-09-14
  • 刊出日期:  2011-11-09

目录

    /

    返回文章
    返回