PE管超声检测试验

详细信息

The Applications of Ultrasonic Testing for PE Pipe

摘要: 测量了PE管的纵横波声速及PE管热熔焊缝声衰减系数，确定了PE管材料的声学性能。采用小波域去噪理论去除噪声，提高了检测回波的信噪比。试验表明，超声检测方法适用于PE管热熔焊缝的焊接质量检测。
- 超声检测 /
- PE管 /
- 声速 /
- 声衰减系数 /
- 信号处理
Abstract: By measuring the longitudinal and shear wave velocity of PE pipe and its ultrasonic attenuation of hot-melt weld, the acoustic properties of PE pipe was determined. Wavelet denoising technique was used to remove noise, and it improved the monitoring of the echo signal-to-noise ratio. Experiments showed that ultrasonic testing method was suitable for the weld quality testing of PE pipe.
- Ultrasonic testing /
- PE pipe /
- Sound velocity /
- Ultrasonic attenuation /
- Signal processing

[1]	刘舜安.PE管管材性能探讨[J].国外建材科技,2006,27(2):20-21.
[2]	梁前明.PE管材的新发展及其工程应用前景[J].国外建材科技,2003,24(5):14.
[3]	钱然,钱明权.PE管材在给水系统实际应用的情况分析[J].安徽电子信息职业技术学院学报,2004,3(4):69.
[4]	梅胜.PE管应用技术发展的现状及前景分析[J].广州大学学报,2004,3(3):276-280.
[5]	Munns I J, Georgiou G A, Abington U K. Ultrasonic and radiographic NDT of butt fusion welds in polyethylene pipe[D]. Watt University, Edinburgh, Scotland, UK: Plastic Pipes IX Heriot,1995:18-21.