在用起重机金属磁记忆检测的信号特征及验证

基金项目:

国家质检公益性行业科研专项资助项目(07-10-51)

详细信息

Metal Magnetic Memory Testing Signals Characteristics and its Verification of Working Crane

摘要: 使用金属磁记忆检测方法对在役的双梁桥式起重机轨道进行了检测。检测结果表明, 起重机轨道的磁记忆信号异常部位多数呈现对称分布, 并与起重机工作时轨道的受力点相吻合; 而轨道上出现的不对称磁记忆异常信号, 是轨道自有应力集中或材料损伤所造成的, 这些部位应该成为以后的监测重点。
- 金属磁记忆检测 /
- 起重机, 应力集中
Abstract: Metal Magnetic Memory(MMM) technology was used to test the double-beam bridge crane rails. The results showed that the most MMM signals were distributed symmetrically in the rails. The location of these MMM signals coincided with the area of the crane orbit. There were some asymmetric abnormal signals of MMM found in the rails. These MMM signals were caused by the own stress concentration or material damage of the rails. These places should be the focus of future testing.

[1]	杜波夫 A A.金属磁记忆法诊断管路\[C\]// 设备和结构论文集, \[s.l.\]: \[s.n.\], 2008: 9-17.
[2]	Dubov A A. Study of metal properties using metal magnetic memory methed［C］// 7th European Conference on Nondestructive Testing .Copenhagen: \[s.n.\], 1998: 920-927.
[3]	沈功田, 吴彦, 王勇.液化石油气储罐焊疤表面裂纹的磁记忆信号研究［J］.无损检测, 2004, 26(7): 349-251.
[4]	胡斌, 沈功田, 吴占稳, 等.加载过程中磁记忆信号特征研究［J］.测试技术学报, 2009, 23(增): 149-152.
[5]	高广兴, 沈功田, 胡斌, 等.金属磁记忆检测方法在特种设备检测中的研究及应用［J］.测试技术学报, 2009, 23(增): 144-148.
[6]	李光海, 刘时风, 沈功田.压力容器无损检测技术-磁记忆检测技术［J］.无损检测, 2004, 26(11): 570-574.