核电站压力容器堆焊层下超声波探伤中变型波的识别

详细信息

Identification of Ultrasonic Anamorphic Wave Caused by Cladding of Pressure Vessel of Nuclear Power Plant

摘要: 介绍了核电站压力容器堆焊层下焊缝超声检测时, 由于堆焊层的影响, 产生变型波反射的特例。分析了因堆焊层产生变型波的原理以及变型波的定位方法。在实际堆焊层试块上, 对提出的变型波定位方法进行了验证。验证结果证明了堆焊层变型波的理论分析以及定位方法的正确性。该方法对判别因变型波造成的伪缺陷具有普遍的应用价值。
- 变型波 /
- 堆焊层 /
- 核电站 /
- 超声波检测
Abstract: The anamorphic wave reflection caused by cladding was introduced when the welding under cladding was tested of pressure vessel of nuclear power plant. The causing principle of anamorphic wave and location method was analyzed. On a cladding weld, test was carried on for verifying the analysis. Verification results proved the accurate of the mentioned method which could widely used on the false single identification caused by anamorphic wave.
- Anamorphic wave /
- Cladding /
- Nuclear power plant /
- Ultrasonic

[1]	李家维, 陈积懋.无损检测手册[M].北京: 机械工业出版社, 1985.
[2]	全国锅炉压力容器无损检测人员资格考核委员会组织编写.超声波探伤[M].北京: 中国锅炉压力容器安全杂志社, 1995.