变电站X射线检测的防护措施

基金项目:

云南电网公司重点资助项目《基于X射线的电力设备数字成像透视检测系统研发与应用》

详细信息

Research on Protection Measures of Substation X Ray Detection

摘要: 通过对射线强度衰减的计算，得出公众人员与现场操作人员的安全距离。然后设计出现场操作人员的铅屏蔽装置，使得操作人员在距离射线源20米处即可处于安全状态。最后通过昆明疾控中心的试验验证，得出了安全距离与防护设备的有效性。
- X射线 /
- 缺陷尺寸 /
- 计算方法
Abstract: Through the calculation of attenuation of X-ray intensity. And then design the site operators lead shielding devices, allows the operator can be in a safe state for 20 meters in distance with the ray source. Experimental verification of the Kunming CDC proved that the distance is safe and the protective equipment is effective.
- X-ray /
- defect size /
- calculation method

[1]	李兆太.γ射线探伤安全防护计算［J］.无损探伤,2004(2):413-416.
[2]	颜祥富，魏伟胜.γ射线检测技术在分馏塔故障诊断中的应用［J］.无损检测,2011,33(5):28-30.
[3]	菅杰丽，于志军.X射线探伤机生产人员外照射剂量当量监测结果与分析［J］.无损探伤,2004(2):427-429.
[4]	By L G H. SARSFIELD, M.Sc.(Eng.), Member. Safety measures in X-ray work, including high-voltage flexible cables［J］. Electrical Engineers,2010,19(3):253-270.
[5]	Taylor, Lauriston S. The economic features of X-ray protection［J］. Journal of Applied Physics,2009,32(1):598-603.