• 中国科技论文统计源期刊
  • 中文核心期刊
  • 中国科技核心期刊
  • 中国机械工程学会无损检测分会会刊
高级检索

几何放大对DR成像质量的影响

杨坤, 朱建平

杨坤, 朱建平. 几何放大对DR成像质量的影响[J]. 无损检测, 2014, 36(5): 27-30.
引用本文: 杨坤, 朱建平. 几何放大对DR成像质量的影响[J]. 无损检测, 2014, 36(5): 27-30.
YANG Kun, ZHU Jian-ping. The Effect of Geometry Enlargement on DR Image Quality[J]. Nondestructive Testing, 2014, 36(5): 27-30.
Citation: YANG Kun, ZHU Jian-ping. The Effect of Geometry Enlargement on DR Image Quality[J]. Nondestructive Testing, 2014, 36(5): 27-30.

几何放大对DR成像质量的影响

详细信息
    作者简介:

    杨坤(1975-),男,高级技术总监,工程师,工程硕士学位,主要从事无损检测技术管理工作。

  • 中图分类号: TG115.28

The Effect of Geometry Enlargement on DR Image Quality

  • 摘要: 数字探测器阵列不能像胶片一样紧贴焊缝,因此数字射线(DR)照相的图像不可避免地会出现几何放大。通过试验探讨了DR检测过程中几何放大对图像分辨率和对比灵敏度的影响,指出在实际检测中必须考虑这些影响并控制几何放大。
    Abstract: Since the DDA cannot attach the welding seam closely as film, the image is geometrical enlarged as compared with the welding seam. This article summarized a series of examination to research the effect of geometrical enlargement on image resolution ratio and image sensitivity .The parameter shall be carefully defined to control the image enlargement ratio.
  • [1] ISO 176362 Non destructive tesing of welds.Radiographic testing.Part 2:X and gamma ray techniques with digital detectors[S].
    [2] 强天鹏.射线检测[M].北京:中国劳动社会保障出版社,2007.
    [3] 郑世才.数字成像检测技术[M].北京:机械工业出版社,2012.
计量
  • 文章访问数:  0
  • HTML全文浏览量:  0
  • PDF下载量:  1
  • 被引次数: 0
出版历程
  • 收稿日期:  2013-11-26
  • 刊出日期:  2014-05-09

目录

    /

    返回文章
    返回