脉冲涡流和电磁声换能器双探头无损检测

Ali Sophian; Rachel S Edwards; 田贵云; Steve Dixon

脉冲涡流和电磁声换能器双探头无损检测

1.
Huddersfield大学计算机工程学院，英国
2.
Warwick大学物理系，英国

详细信息

中图分类号: TG115.28
计量
- 文章访问数: 3
- HTML全文浏览量: 0
- PDF下载量: 3
出版历程
- 收稿日期: 2005-07-12
- 刊出日期: 2007-08-09

Dual-Probe Using Pulsed Eddy Currents and Electromagnetic Acoustic Transducers for NDT Inspection

摘要

摘要: 在许多情况下，只应用一种NDT技术存在不足，这就迫使NDT操作人员使用一种以上的技术以保证检测出危害被检物使用寿命或功能的缺陷。但分别实施多种技术的检测，就会延长检验时间。介绍了一种新的NDT设施，采用两种不同的非接触无损检测技术进行互补，即电磁声换能器(EMAT)和脉冲涡流(PEC)探头。检测结果表明，脉冲涡流和电磁声换能器因是非接触，所以可应用于材料生产过程中的自动在线检验，也可用于在役检验。
- 电磁涡流检测 /
- 脉冲涡流检测 /
- 电磁声探头
Abstract: In many situations, the application of only one non-destructive testing(NDT) technique is generally thought to be inadequate. This drives NDT operators to carry out the inspection using more than one technique to ensure the detection of defects that are potentially harmful to the life or function of the test object. One disadvantage will be the extended and expensive inspection time if the techniques are applied separately. In this article, the introduction of a new NDT system that utilises two different non-contact techniques in a complementary mode, namely Electromagnetic Acoustic Transducers(EMATs) generating surface ultrasonic waves, and Pulsed Eddy Current(PEC) sensors, is reported. Being non-contact, they lend themselves to automatic on-line inspection that can benefit inspection of materials during the manufacturing process and whilst in service. This paper also highlights other potential benefits and presents some preliminary experimental results.
- Electromagnetic and eddy current testing /
- Pulsed eddy current /
- Electromagnetic acoustic transducer

HTML全文

参考文献(16)

[1]	Palmer S B, Dixon S. Industrially viable non-contact ultrasound［J］. Insight,2003,45(3):211.
[2]	Frost H. Electromagnetic-Ultrasound Transducers: Principles, Practice and Applications in Physical Acoustics XIV［C］. New York:1979:179.
[3]	Bray E, Stanley PK. Nondestructive Evaluation-A tool in Design, Manufacturing, and Service［C］. CRC Press Inc,1997.
[4]	Gros X E, Bousigue J, Takahashi K. NDT data fusion at pixel leve［J］. NDT & E International,1999,32(5):283-292.
[5]	Tian G Y, Sophian A. Defect classification using a new feature for pulsed eddy current sensor［J］. NDT & E International,2005,38(1):77-82.
[6]	Yang H C, Tai C C. Pulsed eddy-current measurement of a conducting coating on a magnetic metal plate［J］. Measurement Science & Technology,2002,13(8):1259-1265.
[7]	Robers M A, Scottini R. Pulsed eddy current in corrosion detection［C］. The 8th ECNDT. Barcelona: 2002.
[8]	Lepine B A, Giguere J S R, Forsyth D S, et al. Applying pulsed eddy current NDI to the aircraft hidden corrosion problem［C］. In Aging Aircraft 2001. Orlando Florida:2001.
[9]	Giguere S, Lepine B A, Dubois J M S. Pulsed eddy current technology: characterizing material loss with gap and lift-off variations［J］. Research in Nondestructive Evaluation,2001,13(3):119-129.
[10]	Smith R A, Hugo G R. Deep corrosion and crack detection in aging aircraft using transient eddy-current NDE［C］. In Aging Aircraft 2001. Orlando Florida:2001.
[11]	Smith R A, Hugo G R. Transient eddy current NDE for ageing aircraft-capabilities and limitations［J］. Insight,2001,43(1):14-25.
[12]	Rose J H, Uzal E, Moulder J C. Pulsed eddy-current characterization of corrosion in aircraft lap splices: Quantitative modeling［C］. Proc of the SPIE. 1999:164-176.
[13]	Viktorov I A. Rayleigh and Lamb Waves［M］. New York: Plenum Press,1967.
[14]	Edwards R S, Dixon S, Jian X. Enhancement of the Rayleigh wave signal at surface defects［J］. Journal of Physics D: Applied Physics,2004,37:2291-2297.
[15]	Gros X E. NDT Data Fusion［M］. London: Arnold,1977.
[16]	Hall D L, Llinas J. An introduction to multisensor data fusion［J］. Proceedings of the IEEE,1997,85(1):6-23.

施引文献

资源附件(0)

计量

文章访问数: 3
HTML全文浏览量: 0
PDF下载量: 3
被引次数: 0

脉冲涡流和电磁声换能器双探头无损检测

计量

出版历程

Dual-Probe Using Pulsed Eddy Currents and Electromagnetic Acoustic Transducers for NDT Inspection

计量

出版历程

目录