焊缝近表面缺陷的爬波检测

详细信息

Creeping wave detection of weld near-surface defects

Shanghai Power Station Auxillary Equipment Plant, Shanghai Electric Power Generation Equipment Co., Ltd., Shanghai 201306, China

摘要: 为解决TOFD检测技术的近表面盲区问题,采用爬波对近表面盲区进行补充检测,利用近表面盲区试块对爬波检测系统进行调校,并对表面刻槽试块以及含近表面开口缺陷的模拟试块进行扫查。试验结果表明,当被检区域在爬波检测范围内时,爬波可实现近表面盲区的覆盖,是一种有效的近表面盲区检测方法。
- 爬波 /
- 近表面 /
- 盲区
Abstract: In order to solve the problem of near-surface blind area of TOFD technology, creeping wave was used to supplement the detection of the near-surface blind area. The near-surface blind area test block was used to calibrate the creeping wave detection system. The block with grooves and the simulated blocks containing near-surface opening defects were inspected. The experimental results show that the creeping wave could cover the near-surface blind area when the interested regions were within the detectable range of creeping wave, and it was an effective method to inspect the near-surface blind area.
- creeping wave /
- near-surface /
- blind area

[1]	江山,霍立兴,樊立国,等. 表面及近表面裂纹的爬波无损检测[J]. 无损探伤, 2005, 29(3):7-11.
[2]	王业民. 管道环焊缝衍射时差法与爬波法组合检测应用研究[J]. 石油化工建设, 2019, 41(3):77-80.
[3]	樊利国, 荆洪阳. 爬波检测及其应用[J]. 无损检测, 2005, 27(4):212-216.
[4]	陈玉宝. 爬波技术在锅炉TOFD检测中的应用[J]. 中国特种设备安全, 2012, 28(9):36-38.