• 中国科技论文统计源期刊
  • 中文核心期刊
  • 中国科技核心期刊
  • 中国机械工程学会无损检测分会会刊
高级检索

DR技术几何不清晰度的控制

熊丽华, 梁丽红, 朱黄金, 戴小江

熊丽华, 梁丽红, 朱黄金, 戴小江. DR技术几何不清晰度的控制[J]. 无损检测, 2023, 45(1): 54-57. DOI: 10.11973/wsjc202301011
引用本文: 熊丽华, 梁丽红, 朱黄金, 戴小江. DR技术几何不清晰度的控制[J]. 无损检测, 2023, 45(1): 54-57. DOI: 10.11973/wsjc202301011
XIONG Lihua, LIANG Lihong, ZHU Huangjin, DAI Xiaojiang. Control of geometric unsharpness in digital radiography[J]. Nondestructive Testing, 2023, 45(1): 54-57. DOI: 10.11973/wsjc202301011
Citation: XIONG Lihua, LIANG Lihong, ZHU Huangjin, DAI Xiaojiang. Control of geometric unsharpness in digital radiography[J]. Nondestructive Testing, 2023, 45(1): 54-57. DOI: 10.11973/wsjc202301011

DR技术几何不清晰度的控制

详细信息
    作者简介:

    熊丽华(1972-),女,高级工程师,主要从事承压设备的无损检测技术和质量管理工作

    通讯作者:

    熊丽华, E-mail:lihua.xiong@cimc.com

  • 中图分类号: TG115.28

Control of geometric unsharpness in digital radiography

  • 摘要: 从射线检测实际出发,分析了影响几何不清晰度的主要参数,就目前广泛应用的数字射线成像检测技术,探讨了成像器件与工件无法紧贴放置时,几何透照条件中焦距的控制要求,并推导出曲面工件表面到探测器距离的精确计算公式,为射线检测人员优化检测工艺提供指导。
    Abstract: From the perspective of practical radiographic testing, the main parameters affecting the geometric unsharpness is analyzed. Especially for the widely used digital radiography at present, the control requirements of focal distance under the condition of geometric transillumination is discussed when the detector cannot be placed closely with the object, the accurate calculation formula of the distance between the surface of curved object and the detector is derived, and a guidance for examiners to optimize the testing process is provided.
  • [1] 郑世才.数字射线检测技术(六)——数字射线技术标准介绍[J].无损检测,2020,36(12):46-51.
    [2] 梁丽红.JB/T4730.11射线数字成像标准按规定的关键技术探讨[J].无损检测,2011,33(9),23-24.
计量
  • 文章访问数:  8
  • HTML全文浏览量:  0
  • PDF下载量:  9
  • 被引次数: 0
出版历程
  • 收稿日期:  2022-07-11
  • 刊出日期:  2023-01-09

目录

    /

    返回文章
    返回