Wall thickness detection of stainless steel based on pulse eddy current late signal slope
-
摘要: 分析了304不锈钢的脉冲涡流信号,以单对数坐标系下晚期信号的斜率作为表征壁厚的特征值,拟合出晚期信号斜率与不锈钢壁厚之间的关系式,并通过试验分析了提离高度、缺陷形状等对信号的影响。该方法已进行实践应用,效果良好。Abstract: The pulsed eddy current signal of 304 stainless steel was analyzed, and the slope of the late signal in the single logarithmic coordinate system was used as the characteristic value to characterize the wall thickness.The relationship between the late signal slope and the stainless steel wall thickness is fitted. The effects of lift off height and defect shape on the signal are analyzed through experiments.This method has been applied in practice with good effect.
-
-
[1] 武新军,张卿,沈功田.脉冲涡流无损检测技术综述[J].仪器仪表学报,2016,37(8):1698-1712. [2] TAI C C,YANG H C.Pulsed eddy current for deep metal surface cracks inspection[J].AIP Conference Proceedings,1901,557(1):354-360.
[3] 辛伟,丁克勤,黄冬林,等.基于ANSYS的脉冲涡流激励参数选取的仿真分析[J].机械工程与自动化,2010(2):58-60. [4] XU Z Y,WU X J,LI J,et al.Assessment of wall thinning in insulated ferromagnetic pipes using the time-to-peak of differential pulsed eddy-current testing signals[J].NDT & E International,2012,51:24-29.
[5] 郑岗,刘丁,张震,等.基于提离点的脉冲涡流测厚研究[J].仪器仪表学报,2008,29(8):1745-1749. [6] CHENG W,KOMURA I.Simulation for the assessment of wall thinning using eddy current method[J].AIP Conference Proceedings,2011,1335(1):372-379.
[7] CHENG W Y.Pulsed eddy current testing of carbon steel pipes'wall-thinning through insulation and cladding[J].Journal of Nondestructive Evaluation,2012,31(3):215-224.
[8] 柯海,徐志远,黄琛,等.基于信号斜率的铁磁材料脉冲涡流测厚研究[J].仪器仪表学报,2011,32(10):2376-2381. [9] 陈兴乐,雷银照.铁磁平板脉冲涡流场感应电压时域近似式[J].电工技术学报,2015,30(10):14-19. [10] 殷雪峰,刘红军,崔建杰.脉冲涡流检测技术新进展[J].广州化工,2020,48(23):6-8. [11] NAFIAH F,TOKHI M O,MAJIDNIA S,et al.Pulsed eddy current:feature extraction enabling in-situ calibration and improved estimation for ferromagnetic application[J].Journal of Nondestructive Evaluation,2020,39(3):1-8.
计量
- 文章访问数: 2
- HTML全文浏览量: 0
- PDF下载量: 4
下载:
