ASME电站锅炉项目中相控阵超声演示试块的准备及规程演示

详细信息

Preparation of phased array ultrasonic testing block and specification demonstration in ASME power station boiler project

摘要: 随着业主对相控阵超声检测技术的接受，该技术在电站项目中应用得越来越多。如何依据ASME（美国机械工程师协会）相关标准及公司内部质量控制手册对电站锅炉进行相控阵超声检测变得尤为重要。对于ASME锅炉钢印项目，现场一般会有AI（授权检验师）监督验收全部的过程文件。根据ASME钢印项目相控阵超声检测现场的演示经验，对演示试块的准备及规程演示做出了介绍。
- 相控阵超声检测程序 /
- 人员要求 /
- 演示试块和相控阵现场演示 /
- 缺陷评判标准
Abstract: The application of phased array ultrasonic testing in power plant projects are more popular and acceptable by the owner, and therefore how to use it in boiler power stations according to relevant ASME standards and internal quality control manual of the company has become particularly important. If it is an ASME boiler stamp project, AI (Authorized inspector) will supervise and accept all process documents. According to the previous experience of phased array ultrasonic testing demonstration in the ASME stamp project, the preparation of demonstration block and demonstration of rules are introduced.
- phased array ultrasonic testing procedure /
- personnel requirement /
- demonstration block and phased array field demonstration /
- defect evaluation standard