航空发动机制造中涡流分选技术的应用

详细信息

Application of eddy current separating technology in aero-engine manufacturing

摘要: 针对航空发动机制造中出现的混料问题，在不分解发动机的前提下，提出采用涡流分选技术对问题零件进行原位检测。设计了一种原位检测专用探头，通过试验，证明其具有良好的检测效果。
- 航空发动机 /
- 混料 /
- 涡流分选 /
- 原位检测
Abstract: Aiming to solve the mixture problem in aeroengine manufacturing, the eddy current separating technology was proposed to realize the in-situ testing of problematic parts under the condition of without disassembling the aeroengine. A special probe for the problematic parts in-situ testing was designed. The experiment results indicate that this probe has good detection effect, and has been used successfully.
- aero-engine /
- mixture /
- eddy current separating /
- in-situ testing

[1]	秦峰. 航空涡轮叶片缺陷的扫查式涡流检测技术研究[D].北京:北京理工大学,2016.
[2]	田武刚, 潘孟春,罗飞路,等.某型航空发动机篦齿盘裂纹的原位涡流检测[J].测试技术学报,2008(3):241-244.
[3]	钱艺铭. 废旧破碎冰箱铜、铝混合颗粒涡流分选研究[D].扬州:扬州大学,2016.
[4]	张德浩. 废旧有色金属涡电流分选技术研究[D].南京:南京航空航天大学,2016.