换热管与管板角焊缝的棒阳极射线检测缺陷成像特点

详细信息

Defect imaging characteristic of fillet weld between heat exchange tube andtube sheet with rod anode X-ray inspection

摘要: 分析了换热管与管板角焊缝结构在焊接过程中产生缺陷的各种原因，根据棒阳极射线检测底片的成像特点，对焊缝实际缺陷与底片缺陷影像进行对比，总结了缺陷在棒阳极射线底片中成像的特点。
- 换热管与管板角焊缝 /
- 棒阳极射线检测 /
- 焊接缺陷 /
- 影像分析
Abstract: Based on the analysis on the causes of the defects of the fillet weld structure between the heat exchange tube and the tube sheet in the welding process, and according to the imaging characteristics of the film of the rod anode X-ray inspection, the comparison between the actual defects of the weld and the film image is analyzed, and the imaging characteristics of the defects in the rod anode X-ray film are summarized.
- fillet weld between heat exchange tube and tube plate /
- rod anode radiographic testing /
- welding defect /
- film image analysis

[1]	强天鹏. 管子-管板焊缝的射线照相无损检测技术[J].化工设备与管道,2008,45(6):12-14.
[2]	沈寒领. 换热器换热管-管板焊缝的射线检测[J].压力容器,2003(7):53-55.
[3]	姚炫东, 王元华.热交换器换热管-管板角焊缝的射线检测[J].无损检测,2003,25(12):647-652.
[4]	王成功, 刘桂玲,李伟.换热管-管板间焊接接头的射线检测[J].石油化工设备,2008,37:48-53.
[5]	孙远霞, 郝恩喜.换热管-管板焊缝射线检测技术研究[J].检查与测量,2011(6):47-50.
[6]	王晓雷. 承压类特种设备无损检测相关知识[M].北京:中国劳动社会保障出版社,2007.
[7]	强天鹏. 射线检测[M].北京:中国劳动社会保障出版社,2007.
[8]	王广辰. 换热器管头焊接的质量控制[J].化学工程与设备,2018(5):246-247.