飞机多层结构腐蚀损伤的工业电子计算机断层扫描检测可行性分析

详细信息

Feasibility Analysis on Industrial Computed Tomography for Corrosion Dectection in Aircraft Multilayer Structure

1. Matching Equipment Military Representative Office of Navy in Qingdao, Qingdao 266041, China;
2. Qingdao Campus of Naval Aviation University, Qingdao 266041, China

摘要: 根据飞机多层结构容易出现内部腐蚀的特点，设计并制作了模拟腐蚀缺陷的试件，采用工业CT（电子计算机断层扫描）进行检测试验，通过对检测图像的分析和关键尺寸的测量，分析了工业CT检测多层结构腐蚀损伤的可行性，为多层结构内部腐蚀检测提供了参考。
- 工业CT /
- 多层结构 /
- 腐蚀 /
- 检测
Abstract: Specimen with simulated corrosion was designed and manufactured on the basis of multilayer structure corrosion characteristic in aircrafts. Detection experiments were conducted using industrial computed tomography. The images detected were analyzed and the critical dimensions were measured, feasibility of industrial computed tomography was analyzed. The result can provide reference for inside corrosion detection.
- industrial CT /
- multilayer structure /
- corrosion /
- detection

[1]	刘郁纪. X射线工业CT物理设计及图像重建[D]. 兰州:兰州大学,2010.
[2]	刘秀丽. 飞机结构腐蚀检测技术研究[J]. 机械强度,2004,26(Z1):60-62.
[3]	伍建辉. 工业CT数控系统设计与图像重建研究[D]. 兰州:兰州大学,2011.
[4]	张有宏. 飞机结构的腐蚀损伤及其对寿命的影响[D]. 西安:西北工业大学,2007.
[5]	唐瑜. 工业CT断层图像重建及三维可视化技术[D]. 太原:中北大学,2014.