Ultrasonic Testing of the Flaw Size in the Al/Al Adhesive Structure Based on Hilbert Transform
-
摘要: 采用5 MHz和10 MHz的聚焦探头对胶接铝板进行超声水浸特征成像检测,以及对扫查数据进行Hilbert (希尔伯特)变换后的特征成像,测量了变换前后的人工脱粘缺陷尺寸,并比较了测量精度。试验结果表明:10 MHz探头检测结果比5 MHz探头的检测结果更好;对粘接层下界面成像与底波成像以及粘接层上界面成像进行对比,脱粘缺陷的检出率更高;10 MHz扫查特征成像经Hilbert变换可得到更好的成像结果,人工缺陷尺寸的测量精度进一步提高,测量结果相比实际缺陷尺寸的误差不大于5%。超声特征成像对铝板胶接层有很好的检出效果。Abstract: The paper used 5 MHz and 10 MHz focusing probes to detect the adhesive aluminum plate by the method of ultrasonic water immersion feature imaging testing and imaged the feature after processing the data with Hilbert transform. The size of the artificial debonding defect in the characteristic imaging before and after transformation is measured, and the accuracy of measurement defect size is compared. The result showed that the testing quality of 10 MHz probe was better than that of 5 MHz probe,the detection rate of unglued flaw in the adhesive layer under the interface was the highest compared to the bottom wave imaging and upper interface imaging. Much better imaging result can be obtained by using 10 MHz probe and followed by processing the data with Hilbert transform. At the same time,the measurement accuracy of artificial defect size is also increased and the error is less than 5% compared with the actual flaw size. Ultrasonic feature imaging has a good detection effect on the aluminum plate adhesive layer.
-
-
[1] 王玲. 汽车用钢板铝板胶接性能研究[D].上海:同济大学,2007. [2] 郑瑞琪, 刘清方. 航空工业结构粘接质量控制[J]. 粘接, 2004, 25(2):37-40. [3] 郭忠信.铝合金结构胶接[M].北京:国防工业出版社,1993. [4] 赵永刚. 基于时频分析和神经网络的薄板粘接缺陷超声检测研究[D]. 呼和浩特:内蒙古大学, 2008. [5] 徐猛.多层金属粘接结构粘接质量的超声检测[D].绵阳:中国工程物理研究院,2007. [6] 廉国选,李明轩. 超声在粘接界面的反射和透射[J]. 应用声学,2004,23(4):34-42. [7] 李明轩.粘接质量超声检测研究[J]. 应用声学, 2002, 21(1):7-12. [8] 刘春秘,张素香, 郑维龙. 层压板和蜂窝结构粘接缺陷的超声C扫描检测[J]. 无损检测, 2012, 34(5):62-64. [9] 李建文,王增勇,汤光平. 金属壳体粘接结构件的超声检测[J]. 无损检测,2010,32(4):283-285. [10] 周娥.碳纤维复材层合板低能冲击损伤的超声检测[D]. 南昌:南昌航空大学, 2015. [11] 艾春安,刘瑜, 赵文才,等. 固体火箭发动机结构粘接质量的声-超声检测[J]. 无损检测, 2009,31(12):974-976,979. [12] 张锐.复合材料手动扫描超声特征成像检测系统的研制[D].北京:清华大学,2002:49-51. [13] 陆铭慧,付德永,王海芳,等. 复合材料层状薄板超声特征扫描成像检测[J].无损检测,2005,27(9):449-453. [14] 徐春林,江志农,肖英. 基于Hilbert变换的包络分析及其在机械故障诊断中的应用[J]. 机电工程技术,2004,33(7):114-115,165. [15] 王光荣.基于Hilbert变换的信号包络提取方法研究[J]. 中国科技信息,2012(1):87-88.
计量
- 文章访问数: 0
- HTML全文浏览量: 0
- PDF下载量: 0