锻造参数对TC4锻件的组织和超声声速的影响

详细信息

Influence of Forging Parameters on Microstructure and Ultrasonic Velocity of TC4 Forging

1. Key Laboratory of Nondestructive Testing of Ministry of Education, Nanchang Hangkong University, Nanchang 330063, China;
2. AVIC Guizhou Anda Aviation Forging Co., Ltd., Anshun 561005, China;
3. Shenyang Liming Aero Engine Co., Ltd., Shenyang 110043, China

摘要: TC4中的α和β相的显微组织直接影响到材料的可靠性和寿命，采用有效的超声无损评价方法可以对TC4的组织进行评价。对不同锻造参数条件下TC4试块的超声波声速进行分析，并对照其金相组织数据，得出结论：声速与初生α相的组织分布有一定的相关性关系，α相的组织直接影响到超声波的声速。
- TC4 /
- 显微组织 /
- 超声波 /
- 声速
Abstract: The microstructure of α and β phases in TC4 has a direct impact on the reliability and life of the material. An effective ultrasonic nondestructive evaluation method can be used to evaluate the forging microstructure of TC4. The ultrasonic velocities under various forging parameter conditions of TC4 were analyzed in reference to its metallographic microstructures. The fact is that the velocity and the primary α phase have certain correlation relations, and the organization of α phase is directly affected by the ultrasonic velocity.
- TC4 /
- microstructure /
- ultrasonic /
- velocity

[1]	娄军. 快速凝固钛合金的组织与性能研究[D]. 沈阳:沈阳大学, 2012.
[2]	马济民,贺金宇,庞克昌,等. 钛铸锭和锻造[M]. 北京:冶金工业出版社, 2012.
[3]	徐彦霖,王增勇,黄振翅. 奥氏体不锈钢平均晶粒尺寸的超声评价技术[J]. 无损检测, 2001,23(6):246-248.
[4]	PAPADAKIS E P. Use of correlations and functions in determining nondestructive tests for material properties[C]//Review of Progress in Quantitative Nondestructive Evaluation. Brunswick:BLREN,1992.
[5]	刘俪. 钛合金显微组织对其超声参量及耐蚀性能的影响[D]. 南昌:南昌航空大学,2012.
[6]	邬亚华,唐佳,王伏喜,等. 高铬铸铁组织与超声声速关系的测定[J]. 无损检测,2011,33(12):62-65.
[7]	邹武装,郭晓光,谢湘云,等. 钛手册[M]. 北京:化学工业出版社,2012.
[8]	万刚,吴伟,王茹,等. 钛-钢爆炸焊复合层的超声成像检测[J]. 无损检测,2016,38(7):36-39.
[9]	万江. GH706合金组织与超声检测参数关系研究[D].南昌:南昌航空大学,2016.
[10]	于漫漫. TC4钛合金组织超声信号特征研究[D]. 南昌:南昌航空大学, 2014.
[11]	段锐,蔡建明,李臻熙. 初生α相含量对近α钛合金TG6拉伸性能和热稳定性的影响[J]. 航空材料学报,2007, 27(3): 17-22.