小径管超声检测中伪缺陷的判别

详细信息

Discrimination of False Defects in Ultrasonic Testing of Small Diameter Pipes

Anhui Qianghua Electric Power Project Test and Experiment Co., Ltd., Hefei 230000, China

摘要: 通过对小径管（外径为 32～89 mm，壁厚为4～8 mm）超声检测中疑似缺陷检测结果进行分析，并使用射线检测方法进行验证，总结了该类疑似伪缺陷的特征，证明了从两侧同时检测时，水平定位在焊缝中心远离探头一侧的疑似缺陷为伪缺陷。
- 超声 /
- 回波 /
- 小径管 /
- 伪缺陷
Abstract: Through analysis of the suspected defect by ultrasonic testing of small diameter tube, and the use of X-ray detection and verification, the characteristics of the suspected false defects were summarized. And it was concluded that if the test was performed at the same time from both sides, the one with its horizontal positioning being in the weld center of far away from the probe side was likely to be the pseudo defect.
- ultrasonic /
- echo /
- small diameter tube /
- false defect

[1]	NB/T 47013-2015 承压设备无损检测[S].
[2]	吴刚, 罗晓明,胡文杰,等.小口径薄壁压力管道对接焊缝超声检测[J].无损检测, 2004,26(6):285-287.
[3]	GB/T 11345-2013 焊缝无损检测超声检测技术、检测等级和评定[S].
[4]	DL/T 820-2002 管道焊接接头超声检验技术规程[S].
[5]	DL/T 821-2002 钢制承压管道对接焊接接头射线检验技术规程[S].
[6]	DL/T 869-2012 火力发电厂焊接技术规程[S].