用于热障涂层检测的柔性平面电容传感器

基金项目:

国家自然科学基金资助项目(61671460)

详细信息

Flexible Planar Capacitive Sensor for Detection of Thermal Barrier Coatings

摘要: 对用于热障涂层缺陷检测的平面电容传感器的工作原理进行了分析, 利用COMSOL有限元仿真软件对传感器结构进行了优化设计, 制备了可用于发动机叶片热障涂层缺陷检测的柔性平面电容传感器, 并对传感器的性能进行了测试。测试结果表明, 柔性平面电容传感器可以有效地检测出非金属材料的缺陷。
- 平面电容 /
- 边缘电场 /
- COMSOL /
- 热障涂层
Abstract: The principle of the planar capacitance sensor was analyzed in this paper, and the sensor structure was optimized with COMSOL finite element simulation software. The flexible planar capacitance sensor used for defect detection of thermal barrier coatings in engine blades was fabricated and the performance of the sensor was tested. The testing results show that the flexible planar capacitive sensor can detect the defects in non-metallic materials effectively.
- Planar capacitive /
- Fringing electric field /
- COMSOL /
- Thermal barrier coatings

[1]	杨柳, 杨明皓, 刘嫣红. 利用边缘电场的电容式谷物水分传感器的研究［J］. 中国农业大学学报, 2007(12):58-61.
[2]	刘少刚. 基于单一平面电容传感器的木材含水率检测系统研究［D］.哈尔滨: 哈尔滨工程大学, 2009.
[3]	徐成林. 基于边缘电场传感器的介电测量方法和系统研究［D］.合肥: 合肥工业大学, 2013.
[4]	汪蓓蓓, 黄云志, 刘永洪. 平面电容传感器设计及在材料探伤中的应用研究［J］. 传感技术学报, 2014,27(7):997-1001.
[5]	ALEXANDER V M. Interdigital dielectrometry sensor design and parameter estimation algorithms for non-destructive materials evaluation［D］. America: Massachusetts Institute of Technology, 1999.
[6]	KIM C, LI G, LI J, et al. Numerical analysis on effective electric field penetration depth for interdigital impedance sensor［C］//Journal of Physics: Conference Series. ［S.l.］:IOP Publishing, 2013: 012020.
[7]	KAI H Y S. Design and experimental study on measurement system for fringing electric field sensor［J］. Journal of Electronic Measurement and Instrument, 2012, 2: 14-16.