| [1] |
余冬梅，方奥，张建斌. 3D打印技术和应用［J］.金属世界，2013(6):6-11.
|
| [2] |
刘业胜，韩品连，胡寿丰，等. 金属材料激光增材制造技术及在航空发动机上的应用［J］.航空材料，2014(10)：62-67.
|
| [3] |
BOYER R R. An overview of titanium use in the aerospace industry［J］. Mater. Sci. Eng. A , 1996, 213(1):103-114.
|
| [4] |
ARCELLA F G, FROES F H. Producing titanium aerospace components from powder using laser forming［J］ .JOM， 2000， 52(5):28-30.
|
| [5] |
杜宇雷，孙菲菲，原光，等. 3D打印材料的发展现状［J］.徐州工程学院学报:自然科学版，2014，29(1):20-24.
|
| [6] |
王华明,张凌云，李安，等.金属材料快速凝固激光加工与成形［J］ .北京航空航天大学学报, 2004 ,30(10):962-967.
|
| [7] |
王华明, 张述泉, 汤海波,等.大型钛合金结构件激光快速成形技术研究进展［J］.航空精密制造技术, 2008, 44(6):28-30.
|
| [8] |
王华明，张述泉，王向明.大型钛合金结构件激光直接制造的进展与挑战［J］.中国激光，2012,36(12):3204-3209.
|
| [9] |
ASTM International. Committee F42 on additive manufacturing technologies［EB/OL］.［2014-11-17］http:∥www.astm.org/COMMITTEE/F42.htm.
|
| [10] |
ISO.Committee TC 261 on additive manufacturing technologies［EB/OL］.［2014-10-10］http:∥www.iso.org/iso/stamdards_dvelopmetn/list_of_iso_technical_comittees/iso_technical_committee.htm?commid=629086.
|
| [11] |
SAE International. Aerospace ［EB/OL］.［2015-03-31］ http://standards.sae.org/wip/ams4999b/.
|
| [12] |
KOBRYN P A, MOORE E H, SEMIATIN S L. The effect of laser power and traverse speed on microstructure, porosity, and build height in laser-deposited Ti-6Al-4V［J］. Scripta Materialia, 2000, 43(4):299-305.
|
| [13] |
WU Xin-hua, LIANG Jing, MEI Jun-fa, et al. Microstructures of laser-deposited Ti-6Al-4V alloy［J］. Materials & Design, 2004, 25(2):137-144.
|
| [14] |
WU X. A review of laser fabrication of metallic engineering components and of materials［J］. Maer Sci Technol, 2007, 26(6):631-640.
|
| [15] |
WANG F, WU X H, CLARK D. On direct laser deposited Hastelloy X, dimension, surface finish, microstructure and mechanical properties［J］. Maer Sci Technol, 2011,27:344-356.
|
| [16] |
DUTTA M J, PINKERTON A, LIU Z, et al. Microstructure characterisation and process optimization of laser assisted rapid fabrication of 316L stainless steel［J］. Applied Surface Science, 2005, 247:320-327.
|
| [17] |
陈哲源，锁红波，李晋炜. 电子束熔丝沉积快速制造成型技术与组织特征 ［J］. 航天制造技术, 2010(1):36-39.
|
| [18] |
昝林，陈静，林鑫，等. 激光快速成形TC21钛合金沉积态组织研究 ［J］. 稀有金属材料与工程, 2007, 36(4):612-616.
|
| [19] |
张凤英，陈静，谭华，等. 钛合金激光快速成形过程中缺陷形成机理研究 ［J］.稀有金属材料与工程, 2007,36(2): 211-215.
|
| [20] |
王黎,魏青松,贺文婷，等. 粉末特性与工艺参数对SLM成形的影响［J］. 华中科技大学学报：自然科学版,2012,40(6):20-23.
|
| [21] |
尚晓峰，韩冬雪，于福鑫.钛合金激光快速成形缺陷原因分析［J］. 工艺与检测，2011(3):103-106.
|
| [22] |
ANTONI T, JUAN A, CHVEZ A, et al. Ultrasonic inspection system for powder metallurgy parts［J］. Measurement, 2013,46:1108-1108.
|
| [23] |
PAUL A R, DANIELE P, DACIAN T, et al. Evaluation of polychromatic X-ray radiography defect detection limits in a sample fabricated from Hastelloy X by selective laser melting［J］. NDT&E Internation, 2014,62:184-192.
|
下载:
